MIT and Cambridge University researchers will unveil the conceptual design for a silent, environmentally friendly passenger plane at a press conference Monday, Nov. 6, at the Royal Aeronautical Society in London.
“Public concern about noise is a major constraint on expansion of aircraft operations. The ‘silent aircraft’ can help address this concern and thus aid in meeting the increasing passenger demand for air transport,” said Edward M. Greitzer, the H.N. Slater Professor of Aeronautics and Astronautics at MIT.
Greitzer and Professor Ann P. Dowling of Cambridge University are the lead principal investigators on the Silent Aircraft Initiative. This collaboration of 40 researchers from MIT and Cambridge, plus many others from more than 30 companies, was launched three years ago “to develop a conceptual design for an aircraft whose noise was almost imperceptible outside the perimeter of an airfield in an urban environment.”
While originally conceived to make a huge reduction in airplane noise, the team’s ultimate design also has the potential to be more fuel-efficient. In a typical flight, the proposed plane, which is designed to carry 215 passengers, is predicted to achieve 124 passenger-miles per gallon, almost 25 percent more than current aircraft, according to Greitzer. (For a down-to-earth comparison, the Toyota Prius hybrid car carrying two passengers achieves 120 passenger-miles per gallon.)
The project aims to develop aircraft by 2030.
The conceptual design addresses both the engines and the structure, or airframe, of a plane. Half of the noise from a landing plane comes from the airframe.
Other key features of the design include:
An overall shape that integrates body and wings into a “single” flying wing. As a result, both the body and wings provide lift, allowing a slower approach and takeoff, which would reduce noise. The shape also improves fuel efficiency.
The elimination of the flaps, or hinged rear sections on each wing. These are a major source of airframe noise when a plane is taking off and landing.
Engines embedded in the aircraft with air intakes on top of the plane rather than underneath each wing. This screens much of the noise from the ground.
A variable-size jet nozzle that allows slower jet propulsion during takeoff and landing but efficient cruising at higher speeds.
What will it take to turn the design into a plane by 2030?
“One major technical challenge is the integration of the propulsion system with the aircraft,” Greitzer said. “The propulsion system, with engines embedded in the fuselage, is different than for traditional civil aircraft, in which the engines are located in nacelles below the wing. This presents a different set of issues to the designer.”
Zoltan S. Spakovszky, C. S. Draper Associate Professor in MIT’s Department of Aeronautics and Astronautics, also cited the integration of the propulsion system as a key challenge. Spakovszky and James I. Hileman, a research engineer in the department, are the chief engineers, or day-to-day managers, for the project.
He explained that in today’s airplanes, with engines hanging below the wings, air flows unimpeded into the engine. In the new design, however, air traveling into the air intakes on top of the plane will behave differently. This is because the air particles flowing close to the plane’s body experience friction. As a result, “the particles flow at a lower velocity near the surface of the plane than in the free (air) stream,” Spakovszky said. The new engine must be designed to operate in these strongly nonuniform airflows.
A second important technical challenge involves the craft’s unconventional airframe, Spakovszky said. “The structural integrity of a pressure vessel allowing this single wing-like shape needs to be ensured and poses a major challenge.”
Greitzer emphasized that the collaboration between MIT, Cambridge University and their industrial partners was key to the end result.
“Collaboration and teaming occurred in essentially all aspects of the project. The Silent Aircraft Initiative has been very much an enterprise in which the whole is greater than the sum of the separate parts,” he said.
Spakovszky referred to the overall team effort as the best part of the project. “Technical expectations were taken for granted, but working well across the Atlantic was not a given,” he said. “It was a very, very neat experience.”
- « Anxiety :: FSU study links anxiety sensitivity to future psychological disorders
- Health :: Toddlers learn complex actions from picture book reading »
Sub-editorEcology :: Team moves toward silent, eco-friendly plane
by Sub-editor ( Author at Spirit India )
Posted on November 6th, 2006 at 4:46 pm.
Find more from SpiritIndia on: Health